Leave a message

Applications of hopper / Cabinet dryer /dehumidification dryer

The hopper dryer is widely used for drying any plastic materials. It can dry raw materials that are wet due to packaging, transportation or recycling. It can be directly matched with injection molding machines, extruders, granulators, etc. for drying plastics, which is fast and space-saving.

Cabinet dryer is widely used for drying any plastic materials, and can dry materials of different materials and colors at the same time.Also suitable for use in preheating or drying processes in food, pharmaceutical, electronic plating and other industries.

dehumidification dryer is mainly used for engineering plastics with strong hygroscopicity, such as: PA, PC, PBT, PET, NYLON and other highly hygroscopic raw materials. It can dry the moisture that has penetrated into the plastic pellets, thereby strictly controlling the moisture in the raw materials.



plastic hopper dryer,hot air dryer
Applications of hopper dryer

The hopper dryer is widely used for drying any plastic materials. It can dry raw materials that are wet due to packaging, transportation or recycling. It can be directly matched with injection molding machines, extruders, granulators, etc. for drying plastics, which is fast and space-saving.

1.Adopting a high_performance hot air diffusion device that evenly disperses hot air to keep the plastic drying temperature uniform and increase drying efficiency

2.The unique curved design of the hot air pipe can prevent powder dust from accumulating at the bottom of the electric heater and causing burning.

3.The proportional deviation indicating thermostat is used to accurately control the temperature.

Note: The standard temperature is within 120℃, 200℃ high temperature type can be customized.


hopper dryer,Hot Air Hopper Dryer,Plastic Hopper Dryer,Plastic Injection Machine, Hot Air Drying Mac
Applications of Cabinet dryer

Cabinet dryer    is widely used for drying any plastic materials, and can dry materials of different materials and colors at the same time.

also suitable for use in preheating or drying processes in food, pharmaceutical, electronic plating and other industries.

1. Cabinet dryer Use PID temperature control to accurately control the drying temperature.

2. Cabinet dryer integrates temperature and time control to facilitate the setting of drying parameters for various materials.

3. Cabinet dryer High_quality insulation materials and high_sealing design avoid unnecessary energy loss. Adjustable air inlet.

4. Motor overload protection and phase sequence protection. Equipped with an over-temperature protector to avoid over_temperature drying; equipped with a warning light to respond to faults immediately.


hopper dryer, Cabinet dryer ,dehumidification dryer
Applications of dehumidification dryer
hopper dryer, Cabinet dryer ,dehumidification dryer

The dehumidification dryer is mainly used for engineering plastics with strong hygroscopicity, such as: PA, PC, PBT, PET, NYLON and other highly hygroscopic raw materials. It can dry the moisture that has penetrated into the plastic pellets, thereby strictly controlling the moisture in the raw materials.

Dehumidification dryer features:

1The entire series adopts P.I.D temperature control system.

2. Dehumidification and regeneration work in a continuous cycle to ensure that the dew point temperature remains in a straight line.

4. No pollution is produced to ensure plastic quality.

5.The regeneration temperature is 180°C, saving 23% of time and 30_40% of energy with traditional hot air dryers.

6. A dehumidifier can be used with several independent drying hoppers.


Applications of dehumidification dryer(1)

Working principle of three-in-one dehumidification dryer

Three-in-one series of dehumidification dryer integrating the three functions drying, dehumidification and feeding into one machine. It is especially suitable for places with high degree of automation and compact space. Combined with of European design, the machine has a more beautiful appearance, more stable performance and lower energy consumption.

Features of three-in-one dehumidification dryer

1. High degree of automation, using touch-sensitive human-machine interface and PLC as the main control internally.

2. The honeycomb rotor uses ceramic fiber as the base material, which has good dehumidification effect, stable performance and long service life.

3. Dehumidification, drying temperature and transportation are operated independently. Various temperatures and transportation are designed and set on the touch screen.

4. The rotation speed of the honeycomb runner is adjustable. The honeycomb can reach a dew point below -40℃. In the enhanced configuration, it can reach a dew point of -50℃ or even lower.


hopper dryer, Cabinet dryer ,dehumidification dryer
Contact us
WhatsApp/Wechat:+86 13669826914/13537072604
Eamil:selinawei@katend.com/info@katend.com Phone:+86 13669826914/+86 13537072604 Add: No.12 Jinfu 3rd road, Shibu industrial area,Liaobu Town, Dongguan city, China.
website qrcode